Connect2 Concrete Anchor Systems

:: For concrete roofs - designed to be suitable for a standard ballast system. A ballast system is generally a composition of a waterproof membrane/foam/pebbles. The Anchor is chemically glued into the concrete base/roof.
:: Can be used for Abseil.
:: Rated at 21kN.

:: For concrete roofs - designed to be suitable for custom ballast system.
:: A ballast system is generally a composition of a waterproof membrane/foam/pebbles. Anchor is chemically glued in.
:: Can be used for Abseil.
:: Rated at 21kN.

:: For concrete roofs - designed to be low profile and base insert is chemically glued into the roof.
:: The anchor is then screwed into the insert and tightened.
:: Can be used for Abseil.
:: Rated at 21kN.

:: For concrete roofs - designed to be low profile and base insert is chemically glued into the roof.
:: The anchor is then screwed into the insert and tightened and can be removed for asthetics or a trip hazard and can be replaced by the stainless cap. Can be used for Abseil.
:: Rated at 21kN.

:: For overhead systems - Anchor is designed to provide a secure system into concrete soffit.
:: Rated at 21kN.

:: For concrete roofs - designed to be low profile and is cast in to concrete when poured.
:: Used to prevent direct pullout situations.
:: Can be used for Abseil.
:: Rated at 15kN.

:: Used for rope access and the depth of the eye nut thread can vary depending in the construction.
:: Rated at 6kN or 12kN depending on the structure.